Our award-winning spot weld drilling machine.
FASTDRILL is designed to solve spot welds — even in high-tensile steels. During development of Fastdrill a pneumatic and machanic adjustable feed have been combinaded for the first time. This combination increases the contact pressure of the drill of 60 kg up to 240 kg. Standard devices generate a pure pneumatic contact pressure of max. 150 kg. Another innovation is Fastdrill only start drilling if the drill is in contact with the surface and placed in the right position. This is specially important by usage of carbide drills, because they are extremly strong (3100 Vickers), but against impacts very sensitive. The Fastdrill is suitable for high-tensile and normal steel. Even lifetime of carbide drills is increased by many times. Similarly it is with normal and coated HSS-drills.
Starts only by contacting metal
Easy to handle
Aproved Spot-weld solver
For normal and high-strenght steel
FASTDRILL Spot Weld Drilling Machine
Case with Inlay
|max. 6,2 bar
|ca. 240 kg
|175 l/min./ 6 CFM
|Drill bit holder size:
|Vibration level (handle):
This spot weld drilling machine has both a pneumatic and a mechanic feed. For an exact adjusting use the use the screw at the operating lever. The drill tip puts on the spot weld with high precision. In the further process is the metal sheet clamped between the drill bit and counter bearing. Through pressing the operating lever the adjusting screw is disengaged. FASTDRILL drills the hole with a contact pressure of 240 kg.
For the first time we combined a mechanic and pneumatic forward feed. As a result the contact pressure is increased. We have quadruplie the power!
DURADRILLs have been designed to drill out spot welds on high strength and ultra high strength steels. The special PVD coating gives it an extreme hard tip and a high temperature resistance. It helps to reduce friction between the metal sheet and the drill in order to extend the endurance. DURADRILL is approved by one of the biggest automotive manufacturer.
Our coated DC-cutters are designed for drilling welding spots. The DC Cutters are designed for normal and higher tensile steels, ideal for external skin panels. We would recommend to use our spot weld drilling machine FASTDRILL to reach a very long life time due to the pneumatic feed. This drills are approved by one of the biggest automotive manufacturer.