The flow form rivets are installed using the setting head and corresponding closing head intended for this purpose. During the riveting operation, the setting head is positioned on therivet until the closing head upsets and hardens the rivet.
It is important that the setting head with the centring lug engages into the corresponding depression in the rivet. During the riveting operation, the setting head is positioned on the rivet until the closing head upsets and hardens the rivet. The diameter of the closing head should be at least 7.5 mm for a 6-mm rivet. The closing head has a relief hole for adhesive residue. The hole must be blown clear after riveting, otherwise a stable riveting process can no longer be ensured.
For the special Mercedes-Benz-Rivets
High Quality - Made in Germany
Flow Form Bold
Flow Form Die
|Designed for :||60 kN / 6 T|
|Made in :||Germany|
|Suitable :||PNP 90 UN 2.0 / PNP 90 XT2|