Our large riveting clamp for PNP 90 SNW XT2.
Riveting Clamp NB240
Our large riveting clamp for PNP 90 SNW XT2.
BENEFITS
-
Conical shutter instead of steel ball lock
-
bigger opening depth
-
designed for 10 t / 100 kN
SCOPE OF DELIVERY
-
Riveting Clamp with conical shutter
-
Distance spacer
TECHNICAL DATA
| Length: | 390 mm |
| Width: | 75 mm |
| Heigth: | 350 mm |
| Clamp opening: | 140 mm |
| Opening depth: | 240 mm |
| Weigth: | 11,6 kg |
| Suitable to: | Hydraulicactuator HA XT2 |
Why TKR?
Captive locking pins on the rivet clamp
Ball Lock Pins? The new locking pins are locked conical. The attached pins cannot be lost. Furthermore this solution safes time.
Enourmous forces have never been so easy to handle.
This universal handle was designed for a still better handling. Although you are punching incredible 10 tonnes (100 kN) stays the needed effort surprising low. The handle is unrestricted usable for each riveting clamp of PNP 90 XT2 and remounted in a few seconds.
Already similar, but still new.
PNP 90 UN 2.0 is upgradeable to PNP 90 XT2. This allows punching holes into high tensile steels with up to 100 kN (10 tonnes) with your present PNP 90 hydraulic pump. Convince yourself of the strongest mobile hydraulic system for car body repair - The PNP 90 XT2.
Pressure Accumulator
The DS XT2 supplementary unit is an addition to PNP 90 XT2 stamping and riveting tool. It ensures consistent quality for the riveting process. If the operating pressure drops below 6 bar (required minimum operation pressure), th operator will be informed via optical indicator (red LED) and the pressure accumulator will take over the pressure supply.
Downloads for Riveting Clamp NB240
These products could be interesting for you
