Use of existing riveting tools from the already existing RIVKIT UN 2.0.
Screw the receiving socketin the hydraulic cylinder up to the contact surface and hand-tighten with the wrench set. Do not use force. Then screw the adapter into the rivet clamp receiving socket up to the contact surface and hand-tighten. All riveting tools must only be fitted/removed with compressed air connected. Then screw in the riveting tool punch required for the process into the receiving socket and hand-tighten with the supplied wrench set.
Screw the corresponding counter-piece of the punch into the adapter in the rivet clamp receiving socket and hand-tighten with the supplied wrench set. Do not use force! If necessary, the riveting tools between the hydraulic cylinder and the rivet clamp can be switched.
Use of existing riveting tools (UN 2.0)
the HA XT2 is thredtled accordingly
|Regulated to :||60 kN / 6 T|
|Thread:||M8 > M6|
|Made in :||Germany|
Your existing tools of PNP 90 UN 2.0 are suitable to PNP 90 XT2. By using the 60 kN adaption it is possible. The hydraulic actuator HA XT2 is throttled automatically of 60 kN. This is enabled by the pressure controlled piston.